If you’ve recently purchased the latest boiler, you’ll have to organize for the installation of your boiler. If you purchased your boiler from a reputable boiler company There is a high chance that the boiler installation will be part of the cost of the boiler. However, in the event that you bought the boiler directly from the manufacturer, you may need to organize an installation on your own.
If you’re looking for an uninvolved engineer for the installation of your brand new boiler be sure they are licensed prior to starting working for your system. If you’re having gas boilers put in place, it’s vital that the engineer is competent to deal with gas. If your boiler is installed by an unqualified professional is not just a sign that your boiler may not operate in the way it was meant to. However, a poorly installed boiler could also be extremely, very hazardous particularly when gas is involved. If you’ve found an expert in installation you can be sure that they’ll want to visit your home to evaluate the possible location for installation to ensure that they are capable of bringing all the required equipment along when they come back to install your boiler.
The first aspect that must consider when planning boiler installation is the type of boiler will be installed as different kinds of boilers have different restrictions regarding where they should be placed. Although combi boilers are small enough to be able to fit into most homes open vent systems require sufficient space to house two separate water tanks , one to store cold water, and the other where heated water is stored. Cold water tanks are typically situated in the loft of a home. A boiler with an open vent must be placed near the tanks for the highest efficiency, while the combi boiler is typically located near the water sources that it will heat. If you’re replacing an old boiler it is the most cost-effective to install the new boiler on the spot where the old one was removed because the majority of proper water pipes will be installed. If you’re unsure of the ideal location for your boiler to be installed consider discussing your options with an engineer for installation who can advise you on the most suitable locations, as well as any other restrictions there might be.
If you must get rid of your old boiler before the new one is installed and your hot water service is likely to be cut off for a short time, however the entire process typically will take less than a day and it won’t alter your daily routine. When a new boiler is installed and the installer has completed all necessary safety checks, you’ll be able to begin using the new boiler immediately. The engineer who installed the boiler will be able to inform you aware of all the information you should know in order in order to operate your boiler as securely and efficiently as you can.